Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

Tools

Filter Products

Grid
List
Items 1–36 of 417 total
Application
  1. 'Most contractors use nitrogen to purge lines when on the job. 2
  2. 1" v notcher 1
  3. 1/4" - 1 5/8" O.D. Copper, Aluminum and Brass 1
  4. 1/4″ to 1-1/8″ O.DCopper, Aluminum and Brass 1
  5. 1/4″ to 7/8″ O.D. Copper, Aluminum and Brass 1
  6. 1/8" - 5/8" O.D. Copper, Aluminum and Brass 1
  7. 10 - 18 AWG Solid (4.0 mm² - 0.75 mm²), 12 - 20 AWG Stranded (2.5 mm² - 0.50 mm²) 1
  8. 10 - 20 AWG, 12 - 22 AWG 1
  9. 3/8″ to 2-5/8″ Copper, Aluminum, and Brass 1
  10. 8-16 AWG Solid and 10-18 AWG Stranded Wire 1
  11. AC 1
  12. Acetylene which provides the highest temperature flame of all gases, is used by the construction industry for cutting and welding at very high temperatures. 2
  13. Acid Brush 2
  14. Adjustable Wrench Extra-Capacity 1
  15. Aerosol spray wand extension 1
  16. Air Conditioning, Refrigeration, Heat Pumps 1
  17. Audible Visible 1
  18. Automotive, HVAC/R 1
  19. Automotive, Plumbing, Construction, HVAC, Home Improvement 2
  20. Aviation Snips - Offset Left Cutting 1
  21. Best alloy for general copper-copper brazing in the Sil-Fos family. For copper-to-copper joints the phosphorus in the Sil-Fos product serves as the fluxing agent and no separate flux is necessary. For brass applications, however, flux is recommended. For 6
  22. Blade removal 1
  23. Bolt and Nut Applications 1
  24. Bolt Applications 3
  25. Burr-Free PVC Cutting 1
  26. Calculation of: Area, Length, Volume, and Pythagoras Measurements 1
  27. Captures air speed values from air supply or air return vents in residential or commercial buildings 1
  28. Charge battery 1
  29. Chemical Dispensing 5
  30. Chip Brush 2
  31. Close quarter handsaw 1
  32. Coil gun used for spraying coil cleaners onto coils. No premixing is necessary as chemical and water are automatically blended in mixing head as you spray. 1
  33. Copper Tube Fitting Brush 8
  34. Core Storer 1
  35. Cut and Trim Sheet Metal 4
  36. Cuts and Crimps Wire 10-22 AWG 1
  37. Cutting and Crimping 1
  38. Cutting in Ductwork, Reaching through openings or against a wall 1
  39. Designed For Greater Capacity in Tight Work Spaces 1
  40. Designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean Paste flux 1
  41. Detects Smoke and Carbon Monoxide 1
  42. Ductwork, Reaching Through Openings or Against a Wall 1
  43. Electrical, Automotive, Aerospace, Home Improvement, Construction 1
  44. Electricians 1
  45. Excellent for applying duct adhesive. 2
  46. Extendable Match Holder 1
  47. Eye Protection 11
  48. Fin Whisk Brush 1
  49. Flaring soft metal tubing 1
  50. For copper or brass. Medium range alloy for applications with clearances of .002-.005". 1
  51. For copper or brass. Used to bridge gaps where close fit-up can't be maintained. 1
  52. For copper or brass. Useful for wide clearance, .002-.006". Good ductility. 1
  53. For copper. Requires medium fit-up, .002-.007" clearance 1
  54. For Reaching 1/2" (12.7 mm) and 3/4" (19.1 mm) Connectors in Deep or Tight Boxes 1
  55. For use in Confined Spaces 1
  56. For Work in Close Quarters 1
  57. Gas pressure regulation 1
  58. Gas tank for welding 2
  59. General Purpose 4
  60. General purpose filler for steel and copper alloys. Melting range usefulfor wide clearances. 3
  61. Great for cleaning aluminum prior to soldering 1
  62. Hacksaw Blade 1
  63. Hand Cleaners 1
  64. Handy-Flux is an all-purpose flux for use in brazing both ferrous and non=ferrous metals and alloys. Where larger mass assemblies are being joined, Black Flux or Handy B1 is often recommended as it offers high temperature protection. 1
  65. High-Leverage Diagonal-Cutting Pliers 1
  66. High-Leverage Diagonal-Cutting Pliers - Angled Head 1
  67. Hose for use with A/C Easy Seal Line of products 1
  68. Hose Repair Kit 1
  69. HVAC 11
  70. HVAC/Refrigeration 1
  71. HVACR 1
  72. Hydraulic Flaring And Swaging Tool For Sizes 1/4,5/16,3/8,1/2,5/8,3/4,7/8 1
  73. Illumination 13
  74. In the construction industry, oxygen is primarily used as an accelerant to inspire a hotter flame from a welding torch. 1
  75. Injector tool for A/C-Renew 1
  76. Journeyman™ Standard Long-Nose Pliers - Side-Cutting 1
  77. Low temperature solder for all metals except aluminum. Used in refrigeration joints. NSF 51 listed. 1
  78. Magnetic Hex Driver 2
  79. Most contractors use nitrogen to purge lines when on the job. 1
  80. NOVENT® Multi-key unlocks R-22 , R410 and universal caps. 1
  81. NOVENT® Screwdriver Key unlocks pink R410 Novent locking caps. With a swiveling tip, the Screwdriver tool is great to get into tough to reach places. 1
  82. Nut Driving on Unlimited Bolt Length 1
  83. Nut Driving on Unlimited Bolt Lengths 3
  84. Pipe duct cutter 1
  85. Pipe wrench 1
  86. Premium alloy for copper or brass. Excellent strength and ductility, use as replacement for 15%. 1
  87. Pressure Regulation 1
  88. Proprietary Information - Not Disclosed 2
  89. Provides exact drop-in replacement 3
  90. Pump Pliers 1
  91. Purging 3
  92. Pvc cutter 1
  93. Refrigerant charging 1
  94. Refrigerant Pressure Testing 1
  95. Refrigeration and A/C Systems 1
  96. Reinforced towels feature multi-ply tissue reinforced with nylon webbing for added strength on the job 1
  97. Scratch Brush 1
  98. Secures Glasses 1
  99. Service Light Bulb 1
  100. Set manifold pressure for natural or LP gas 2
  101. Similar to Stay-Brite. Plastic range useful in bridging wider gaps. Certified to NSF 51 listed. 1
  102. Solder Flux 1
  103. Sprayer 2
  104. Sprays and carries water from source to where the consumer wants it 2
  105. Sprays water from hose directiolly where the customer wants it 1
  106. Standard cleaning brush for PVC pipe - 18" for easy cleaning. 1
  107. Standard Long-Nose Pliers - Side Cutting 1
  108. Stands up to oils, chemicals and solvents 1
  109. Stay Clean can be used with most tin based solder compositions and is an excellent companion flux with Harris Stay Brite® and Stay Brite® #8. Stay Clean is an active soldering flux. It works well on copper and brass but is more frequently used on base met 1
  110. Stay Silv white flux is recommended for brazing copper and copper alloys, (except aluminum bronze), steel, stainless steel, nickel alloys and other ferrous base metals. It is used with many high silver brazing filler metals of the AWS A5.8 BAg classificat 1
  111. Telescopic Mirror 4
  112. The 95/5 tin-antimony solder is useful for applications where moderately elevated temperature is a factor. It has a higher electrical conductivity and is recommended where lead contamination must be avoided. The tin-antimony solders are not recommended fo 1
  113. Tightening 1
  114. Torque flare fittings 1
  115. Trouble Light 1
  116. Tube bending 1
  117. Tube Cutter 1
  118. Tube Cutting 3
  119. Tube cutting, deburring, and crimping 1
  120. Turning Fasteners 2
  121. Used to join copper and most copper alloys, lead, nickel alloys and steel. Not recommended for joints subject to high stress or vibration in the cooling industry due to loack of sufficient elongation properties. Heat sources include soldering guns, iron 1
  122. Valve Core 1
  123. Vari bit 1/4-3/4 1
  124. Vari bit 1/8-1/2 1
  125. Various 1
  126. Welding 3
  127. When installed the NOVENT® outer casing will rotate around the thread insert, not allowing cap to be removed. Torque limiter prevents over tightening. Embossed ID labeling prevents refrigerant gas mixing. Grasp cap, insert key and turn clockwise until 4
  128. Work on Stacked Circuit Boards or Other Long Bolt Applications 5
  129. Works wet or dry 3
  130. Zipper Bags-Canvas 1
  131. Show more options
Brand
  1. BOSS® 1
  2. ClenAir by Nu-Calgon 1
  3. Fast Orange® 1
  4. Harris® 15
  5. Imperial® 6
  6. Klein Tools® 79
  7. LENOX® 20
  8. Lutz® 2
  9. Magjumper 1
  10. Parker® 10
  11. Sharpie® 1
  12. Southwire 2
  13. Streamlight® 19
  14. TRADEPRO® 7
  15. Victor® 19
  16. Air-Trol Metal Products 1
  17. Appion 1
  18. Atlantic Safety 2
  19. BesTech 1
  20. BRAMEC 1
  21. Carrier Enterprise 6
  22. Cliplight 1
  23. CPS 1
  24. DiversiTech 44
  25. Edge 12
  26. Flexon 2
  27. Highside 1
  28. Jb Industries 3
  29. Kimberly-Clark 2
  30. Lucas-Milhaupt 7
  31. Lumilite 1
  32. Mainstream Engineering 1
  33. Malco 12
  34. Mastercool 4
  35. Nest 1
  36. Novent® 5
  37. Nu-Calgon 11
  38. Plews 1
  39. RCD Parts 4
  40. Rectorseal® 2
  41. Sensible Products 2
  42. Supco 1
  43. System Sensor 1
  44. testo 1
  45. TopTech 7
  46. Totaline 1
  47. Varies 6
  48. Worthington 2
  49. Yellow Jacket 88
  50. Show more options
Promos
  1. Fall Promo 8
Composition
  1. 100% Cotton 1
  2. 100% Cotton - Lint Free 1
  3. 100% pure bristle, Wood 2
  4. 100% pure stiff horsehair, Tin 2
  5. 100% Recycled Paper 1
  6. 1680D Ballistic Weave 1
  7. ABS Double molded housing with Alluminum block and brass valves 1
  8. Ag15Cu80P5 6
  9. Aluminum 3
  10. Aluminum Alloy 1
  11. Aluminum Oxide 3
  12. Aluminum oxide grain resin bonded to synthetic nylon cloth. 1
  13. Aluminum, Brass, Plastic 2
  14. Aluminum, Plastic, Rubber, Stainless Steel 1
  15. Ballistic Polyester 1
  16. Bi-Metal 7
  17. Bi_Metal 1
  18. black oxide plated 1
  19. Boric acid, potassium fluoride and potassium tetraborate 1
  20. Brass 8
  21. Brass, Copper, Polycarbonate, Stanless Steel 4
  22. Brass, Glass, Plastic 3
  23. Brass, Plastic 2
  24. Brass, Plastic, Rubber, Stainless Steel 2
  25. Brass, Plastic, Stainless Steel 5
  26. Brazing Flux 1
  27. Canvas 1
  28. Carbon Steel Curved Handle 1
  29. Chrome Plated Brass 1
  30. Copper 6
  31. Copper, Polyester, Rubber 9
  32. High Grade Brass 4
  33. Highspeed Steel 2
  34. highspeed steel, stainless steel and plastic 4
  35. highspeed steel, stainless steel, plastic and rubber 1
  36. Induction Hardened Steel 1
  37. Inorganic acid & salt type flux 1
  38. Latex rubber 1
  39. Limonene, C12-15 pareth-11, diethylhexl sodium sulfosuccinate, dimethyladipate, phenoxyethanol 1
  40. Metal 9
  41. Nickel plated brass 1
  42. Nitrile 2
  43. Nylon 1
  44. Nylon Frame, Polycarbonate Lens 10
  45. Paste 1
  46. Plastic 3
  47. Plastic, Stainless Steel 6
  48. Plastic, Steel 1
  49. Poly sleeve over bristles 2
  50. Proprietary Information - Not Disclosed 3
  51. PVC 1
  52. PVC frame, Polycarbonate lens 1
  53. Rubber 3
  54. Rubber, Brass and Forges Steel 1
  55. Rubber, Steel 2
  56. Stainless Steel 1
  57. Stainless Steel, brass, forged steel, rubber and plastic 1
  58. Stainless Steel, Wood 1
  59. Stainless Steel/Plastic handle 1
  60. Steel 63
  61. Thermo Plastic Rubber 1
  62. TrekDry 2
  63. Various 1
  64. Show more options
Digital
  1. No 1
  2. Yes 4
Refrigerant
  1. R-22 1
  2. R-32 1
  3. R-404a 5
  4. R-407c 7
  5. R-410a 5
  6. R-502 2
Size
  1. .050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" 1
  2. 1 1/2" 1
  3. 1 1/2" x 10 Yards 2
  4. 1 1/2" x 25 Yards 1
  5. 1" 1
  6. 1.75" x 1.5" x 2.25" 1
  7. 1/2" 1
  8. 1/2" and 3/4" 1
  9. 1/4 inch Keystone Tip, 4-Inch Shank 1
  10. 1/4" 8
  11. 1/4" and 3/16", 3/8" and 5/16" 2
  12. 1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4 1
  13. 1/4-Inch Tip, 4 Inch Shaft 1
  14. 1/8-1/2 1
  15. 10 - 18 AWG Solid, 12 - 20 AWG Stranded 1
  16. 10 - 20 AWG Solid, 12 - 22 AWG Stranded 1
  17. 10" 3
  18. 10" x 12" 1
  19. 10-16 x 1 1
  20. 10-16 x 1/2 1
  21. 12 1
  22. 12-Piece SAE 1
  23. 13 3/4" x 2" x 1" 1
  24. 14" x 14" x 14" 1
  25. 15 1/4" x 2 1/4" 1
  26. 16" x 22" 1
  27. 18" 1
  28. 2" 1
  29. 2-Piece 1
  30. 2.7" 1
  31. 2.7" in length 1
  32. 21 3/4" 1
  33. 25' 1
  34. 3 1/2" 3
  35. 3 1/2'' 1
  36. 3" 3
  37. 3-Piece 1
  38. 3/16" and 5/16 1
  39. 3/16-Inch and 1/4-Inch Slotted, #1 and #2 Phillips, 1/4-Inch and 5/16-Inch Nut Drivers 1
  40. 3/8" 2
  41. 3/8" square, 1/2" square 1
  42. 4 Pack 1
  43. 4" x 6" x 1/4" 1
  44. 4.77" 1
  45. 5-in-1 1
  46. 5.14" in length 1
  47. 5.4" 1
  48. 5.9" 1
  49. 5/16 inch Keystone Tip, 6 inch Shank 1
  50. 5/16 inch Tip, 6 inch Shank 1
  51. 5/16" 4
  52. 6 3/4" 1
  53. 6 3/4'' 1
  54. 6" 6
  55. 6-3/8'' 1
  56. 6.21" 1
  57. 6.5" 2
  58. 6.5" to 21" 1
  59. 6.75" 2
  60. 7 31/32" 1
  61. 7" 3
  62. 7.25" 1
  63. 8 1/16'' 1
  64. 8 1/2" 1
  65. 8 heads 1
  66. 8" 3
  67. 8.55" 1
  68. 8.625 1
  69. 9 3/4" 1
  70. 9 3/4" x 16 3/4" 1
  71. 9 3/4'' 2
  72. 9 3/8" 1
  73. 9" 1
  74. 9" (extended 20") 1
  75. 9" x 4" x 2.5" 1
  76. 9" x 6.5" x 1.5" 1
  77. 9-Key SAE 1
  78. 9.2" 1
  79. 9/16-Inch Tip, 4 Inch Shaft 1
  80. CR123a 2
  81. Facecap Diameter: 1.20 in. (3.05 cm) Width: 4.03 in. (10.24 cm)Maximum Depth (including headband mounting plate): 3.12 in. (7.92 cm) 1
  82. Large 3
  83. Mil 3
  84. Varies 1
  85. Show more options
Type
  1. 2-Valve 1
  2. 5-in-1 1
  3. 6 in 1 2
  4. Abrasive Cloth 3
  5. Abrasive Pad 1
  6. Adjustable-Length Screwdriver 1
  7. Charging 16
  8. Charging/Vacuum 2
  9. Crimping 1
  10. Diagonal Cutting 1
  11. Digital Manifold 1
  12. Double Sided 1
  13. Extra Capacity Adjustable Wrench 2
  14. Gaskets 1
  15. Gloves 4
  16. Hallow Shaft 1
  17. Headlamp 1
  18. Hex Head Slide Driver Tools 1
  19. High Leverage Diagonal Cutting Pliers 1
  20. High Leverage Side Cutting/Connector Crimping Pliers 1
  21. High Quality Towels 1
  22. Hollow 1
  23. Hollow shaft 1
  24. Ignitor 1
  25. Injector tool 1
  26. Laser Reflection 1
  27. Lithium 2
  28. Locking Cap 3
  29. Locking Cap With Key 1
  30. Machine Washable 1
  31. Magnetic 2
  32. Metal Guard Trouble Light 1
  33. Multi Key 1
  34. Multi-Bit Cushion-Grip 1
  35. Multi-Bit Cushion-Grip Ratcheting 1
  36. Multi-purpose hand cleaner towels 1
  37. Nut Drivers 19
  38. Offset 4
  39. Pipe wrench 1
  40. Programmable Thermostat 1
  41. Remote Test Station 1
  42. Reversible jaw pipe wrench 1
  43. Right Angle 2
  44. Rough Service Light Bulb 1
  45. Screwdrivers 12
  46. Shop Towels 3
  47. Snip 1
  48. Switch Drive 1
  49. System Flushing 1
  50. tool 5
  51. Tool Bag 1
  52. Torches, Tips and Accessories 19
  53. Torque Wrench 1
  54. Tote 1
  55. Twist Rotating Head 1
  56. Utility, Machine Washable 2
  57. Valve Core 1
  58. Valve Core Tools 3
  59. Valve Cores 3
  60. Wrenches 3
  61. Zipper 1
  62. Show more options
Voltage
  1. 115 VAC 1
  2. 125 VAC 1
  3. 20-29 VDC 1
  4. 3 VDC 2
Product Price Actions
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
Harris - SCPF4 Stay Clean Paste Flux 4 oz
Item: STAYCLEANPASTE
MFR: SCPF4
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
What’s the price?
Sign in for pricing.
Grid
List
Items 1–36 of 417 total